Ask a restaurant owner where their greenhouse gas emissions come from and you will hear about the gas hobs, the cold rooms, perhaps the delivery van. That makes sense: those are the items they see, and pay for, on every energy bill. Yet when you build a restaurant carbon footprint properly, most of it sits somewhere else: in what comes through the back door. The rib of beef, the butter, the fruit, the wine. In other words, in purchased goods, which the GHG Protocol files under Scope 3.

Scopes 1, 2 and 3 in plain terms

The GHG Protocol, the international standard for corporate carbon accounting, sorts a company’s emissions into three scopes.

ScopeGHG Protocol definitionExamples in a restaurant or hotel
Scope 1Direct emissions from owned or controlled sourcesCooking gas, boilers, refrigerant leaks
Scope 2Indirect emissions from the generation of purchased energyElectricity, district heating or cooling
Scope 3All other indirect emissions in the value chain, upstream and downstreamFood, drinks, linen, cleaning products, deliveries, waste, staff commuting

Scope 3 category 1: purchased goods and services

Scope 3 is split into fifteen categories. The first, purchased goods and services, covers all upstream, cradle-to-gate emissions from producing the goods and services a company buys in the year, according to the GHG Protocol technical guidance. For a kilo of beef, that means rearing the animal, feeding it, slaughter, butchery and packaging. Transport from your direct supplier to your site, unless it runs in your own vehicles, belongs to another category: category 4, upstream transportation.

Why purchased goods weigh the most

There is no official “typical” breakdown for a single restaurant: every site has its own menu, suppliers and building. But three reference points all point the same way.

Across companies. The GHG Protocol puts it plainly on its Scope 3 page: the majority of total corporate emissions come from Scope 3 sources. Its FAQ cites a food manufacturer, Kraft Foods, whose value chain made up more than 90% of its total emissions.

Across the food system. A 2019 French study supported by ADEME, the French environment agency, puts the carbon footprint of household food consumption in France at 163 million tonnes of CO2 equivalent a year. Agricultural production alone accounts for two-thirds of it. Shops, distribution and out-of-home eating come far behind. Most of the carbon in a meal is emitted before the produce reaches the kitchen.

Across UK hospitality. The Zero Carbon Forum, which built the sector’s net zero roadmap with UKHospitality, places over 60% of the sector’s emissions in its supply chains. UKHospitality itself uses the farming behind restaurant ingredients as its example of Scope 3.

Energy still counts. The same French study estimates that 40 to 45% of the energy and CO2 linked to meals eaten out comes from uses that are not specific to cooking: heating, hot water, lighting. But that item is measured from a handful of energy bills. Purchases are spread across thousands of invoice lines and dozens of suppliers.

Not every purchase line is equal

According to the same study, methane, mostly from ruminants and livestock manure, makes up 29% of the carbon footprint of food in France, and nitrous oxide, mostly from nitrogen fertilisers, 23%. Meat and dairy therefore carry a large share of the stakes. ADEME’s Impact CO2 tool shows it at plate level: 4.97 kg CO2e for a meal with beef, 0.85 kg CO2e for a vegetarian meal.

What about a hotel carbon footprint?

In a hotel, building energy (heating, air conditioning, hot water) is more visible. Scope 3 purchases are just as broad, though: restaurant and bar, breakfast, linen, guest amenities, cleaning products, small equipment, outsourced services. It is also the most scattered item, spread across many suppliers and departments.

Who has to report?

Rules differ by country. In France, a greenhouse gas emissions report (BEGES) is mandatory for private companies with more than 500 employees, as well as for the State, local authorities above 50,000 inhabitants and other public bodies above 250 staff. It is updated every three or four years depending on the organisation and published on an ADEME platform. Since a decree of 1 July 2022, it must include significant indirect emissions, in other words Scope 3.

Most independent restaurants fall below such thresholds; groups often do not. And for everyone, the question also comes from elsewhere: tenders, corporate clients, labels such as Green Key.

Measuring Scope 3 category 1: four methods

The GHG Protocol describes four methods for purchased goods and services, from the most supplier-specific to the most generic.

MethodPrincipleData needed
Supplier-specificThe supplier provides its product’s cradle-to-gate footprintProduct-level life cycle data
HybridSupplier data, with averages filling the gapsThe supplier’s Scope 1 and 2, allocated to your purchases
Average-dataMass purchased × average emission factor per kiloQuantities purchased, in kilos or units
Spend-basedAmount spent × emission factor per unit of spendPurchase amounts by category

The GHG Protocol notes that supplier data is not necessarily more accurate than a good industry average, and that methods can be combined: a more specific method for the purchases that contribute most, a simpler one for the rest.

Why spend-based figures mislead on food

With the spend-based method, the footprint follows spend. A supplier price rise pushes your “carbon” up without a single extra gram entering the kitchen; the GHG Protocol even suggests adjusting for inflation when using this method. And swapping some beef for pulses shows up only through the change in spend, not through the change in emissions.

The average-data method follows what you actually buy: kilos, multiplied by a factor per kilo. For food, the French reference is Agribalyse, ADEME’s database; we explain how it works and where it falls short in our guide to Agribalyse.

The real obstacle: quantities

The hard part is not the multiplication. It is getting reliable kilos for every product bought. On invoices, butter comes by the case, lettuce by the piece, wine by the bottle, meat by weighed net weight. Without harmonised units there is no calculation, and an invoice total says nothing about kilos. It is the same work you need to compare prices across suppliers: reading every product line, not just the header. We explain why classic invoice OCR falls short on line items.

Where to act once purchases are measured

  • Menu and protein mix. The most powerful lever, since meat and dairy carry a large share of emissions.
  • Food waste. A binned kilo has already emitted everything it took to produce it. See reducing food waste in restaurants.
  • Season, origin and transport mode. Fruit flown in does not carry the same footprint as fruit shipped by sea: see our guide to sustainable food purchasing.
  • Suppliers. Once you know which product families weigh most, talk to the suppliers concerned about product data, origins and alternatives.

What Eqolux does

Eqolux’s Impact & Origins add-on starts from your purchasing documents (invoices, credit notes, delivery notes), already read line by line. It estimates the carbon footprint of your purchases using Agribalyse factors, across 100% of spend rather than a sample, and rebuilds the origin, labels and seasonality of each product, with an origins map. That data feeds your ESG reporting and prepares your audits and certifications, such as Green Key.

Eqolux does not issue a certified carbon assessment. It gives you the purchasing building block of your Scope 3, sourced and up to date: the one that takes longest to rebuild by hand.

Key takeaways

  • Scope 1 covers your direct emissions, Scope 2 purchased energy, Scope 3 the rest of the value chain. Purchased goods and services are category 1.
  • In France, agricultural production accounts for two-thirds of the carbon footprint of food: the carbon in a meal sits mostly in the produce you buy.
  • Spend-based figures are quick but track prices; average data (kilos × factor per kilo) tracks what you actually buy.
  • Reliable quantities, line by line and across every supplier, come before any serious calculation.
  • In France, large companies must report Scope 3 in their BEGES; below the thresholds, the demand comes from clients, tenders and labels.

Want to see the footprint of your own purchases? Explore the Impact & Origins add-on or book a demo on your own documents.