To estimate the carbon footprint of your food purchases, you need two things: what you bought, in kilos, and an emission factor per kilo for each product. The first is on your invoices. For the second, France has a public reference: Agribalyse.

Here is what the Agribalyse database contains, what it does not tell you, and how to get from a product record to an invoice line.

What is Agribalyse?

Agribalyse is a public reference database on the environmental impacts of agricultural and food products, built with life cycle assessment (LCA).

  • Who publishes it? The database belongs to ADEME, the French environment agency. Since September 2021 it has been governed by a scientific interest group, GIS Revalim, set up by INRAE, ADEME, ACTA and ACTIA.
  • Since when? A first version, published in 2014, covered only farm production. It was later extended to processing, packaging, logistics and preparation.
  • How many products? Over 2,500 ready-to-eat foods and over 200 agricultural products.
  • Which version? Version 3.2, published in November 2024, after 3.0 (June 2020) and 3.1 (October 2022). A new version is announced for 2026.
  • Is it open? Largely, yes: an online explorer, open data files and versions for LCA software. Only the detailed inventories used in that software partly require an ecoinvent licence (data access). Any reuse, including commercial, must credit the source (ADEME) and the date of the last update.

Agribalyse describes products as consumed in France, including imports such as coffee and chocolate. Outside France it remains an openly documented reference, provided you keep in mind that it reflects the French market.

What an Agribalyse record contains

For each product, Agribalyse provides 16 indicators, the ones the European Commission recommends for its Product Environmental Footprint (PEF) method. Climate change, in kg CO2 equivalent, is only one of them: the database also covers water and air quality and soils. A single score, the “EF single score”, aggregates them; only comparisons between products are meaningful, not its absolute value.

Values are given per kilo of product “consumable by the consumer” and broken down by life cycle stage, as the Agribalyse FAQ explains:

StageWhat it covers
AgricultureFarm production, including transport of inputs (fertilisers, crop protection)
ProcessingFood industry processes that transform raw materials
PackagingMaterials, forming, end of life and transport of packaging to the factory
TransportRaw materials to the factory, then the product to the platform and the shop
Retail and distributionEnergy, water, heat and refrigerants in the shop
ConsumptionPreparation and storage at home: cooking, refrigeration

The stage-by-stage breakdown is published as open data on data.gouv.fr.

From database record to invoice line

The method is what the GHG Protocol calls the average-data method: for each product, the mass purchased multiplied by an average emission factor per kilo, summed across all lines (technical guidance, category 1).

Purchase footprint = Σ (kilos purchased × factor in kg CO2e per kilo)

On paper it is a multiplication. In practice, it takes four steps.

1. Convert every line to kilos

Invoices speak in cases, pieces, bottles and trays. A “BUTTER UNSALTED 10X1KG” line billed per case means 10 kg per case; a crate of lettuces, trays of eggs or wine by the bottle all need converting. Even for liquids, the factor is expressed per kilo. This is the longest step, and the one where a unit error multiplies the result by ten.

2. Match each product to the right entry

“Unsalted butter block 1 kg” must point to the butter entry, not to a dish containing butter. Choose the entry that describes the product as you buy it (fresh, frozen, tinned, raw or ready-made), since the factor applies to a kilo of that exact product. When nothing matches exactly, take the closest entry and record the choice.

3. Decide which stages to keep

Agribalyse follows the product all the way to the consumer. A restaurant does not necessarily buy from a supermarket, and cooking happens in its own kitchen, which falls under its Scopes 1 and 2 and is already counted through its energy bills. Two options are defensible: keep the full life cycle, which is simpler and directly comparable with published values, or keep only the stages from agriculture to transport, to match the cradle-to-gate boundary of Scope 3. What matters is to document the choice and keep it from one year to the next.

4. Multiply, add up, break down

Once kilos and factors are in place, the calculation is instant. The value lies in the breakdown: by product family, supplier, site and month.

Take three fruit lines, with Agribalyse 3.2 values as published by ADEME’s Impact CO2 tool, full life cycle:

Purchase lineKilosFactor (kg CO2e/kg)Emissions (kg CO2e)
Apples400.4116.4
Mangoes shipped by sea400.7329.2
Mangoes flown in4011.7468

Same quantity, same product family: the air-freighted mangoes weigh sixteen times more than the sea-freighted ones. A spend-based estimate would never see that gap.

The limits to keep in mind

Agribalyse is a reference database, not a measurement of your products. Its own documentation says so clearly, both in its data scope and in its FAQ.

  • Average products. Values describe a “standard” product consumed in France, not a brand or a supplier. They cannot compare two products in the same category, or the same product from two production systems.
  • Organic and conventional are hard to compare. The FAQ states that organic data is difficult to compare with conventional data.
  • Little seasonality, no local sourcing. Apart from a few products (tomatoes, strawberries, green beans), indicators are not broken down by season or local supply. Seasonality has to be tracked separately: see our guide to sustainable food purchasing.
  • Issues still poorly covered. The database itself lists biodiversity, soil carbon storage and water use among the areas to improve.
  • Values change. Corrections between versions change results. Record the version you use, or your year-on-year comparisons will mix changes in your purchasing with changes in the database.
  • No FLAG split yet. Land-related (FLAG) emissions, required by some frameworks such as SBTi, are not separated today; the database plans to add them in its next version.

The GHG Protocol also reminds users of average data to check a database’s age and its geographical and technological representativeness. For purchases made in France, Agribalyse is the closest reference; for a very specific product, reliable supplier data can do better.

Agribalyse or spend-based factors?

The other way to estimate Scope 3 purchases is to multiply amounts spent by emission factors per unit of spend.

Spend-based factorsAgribalyse (average data)
InputAmounts spent per categoryKilos bought, product by product
GranularityBroad purchasing familiesOver 2,500 foods
Effect of a price riseFootprint goes upNone
Effect of a menu changeVisible only through spendVisible product by product
EffortLow: accounting data is enoughHigh without tooling: every line read and converted

In its decision tree, the GHG Protocol keeps spend-based factors for cases where the physical quantities purchased are not available. To place this calculation within a full footprint, see our article on restaurant carbon footprint and Scope 3.

How Eqolux uses it

The Impact & Origins add-on applies this logic to your documents. Every invoice, credit note and delivery note line is extracted, its description and unit harmonised in the purchase catalogue, and its carbon footprint estimated from Agribalyse factors. The calculation covers 100% of spend, not a sample, and every line stays linked to its source document. Origins, labels and seasonality complete the picture, and it all feeds your ESG reporting.

It is an estimate based on average factors, with the limits described above, not a certified carbon assessment.

Key takeaways

  • Agribalyse is ADEME’s public reference database on the environmental impact of over 2,500 foods, open access, at version 3.2 since November 2024.
  • It provides 16 indicators per kilo of product, including climate change in kg CO2e, broken down from farm to consumption.
  • For your purchases: kilos bought × factor per kilo, line by line. The hard part is converting every line to kilos and matching it to the right entry.
  • These are average values: no comparison between brands or between organic and conventional, and seasonality is covered for only a few products.
  • Record the version and stages you use, so year-on-year comparisons stay honest.

Want to see your purchases turned into a carbon footprint, line by line? Explore the Impact & Origins add-on or book a demo on your own documents.